How to make an effective Niro atomizer
Release time：
2025-12-01 11:26:49
The atomizer atomizes the test solution and is an important part of the atomization system. Its performance has an important impact on measurement accuracy and chemical interference. Therefore, the atomizer is required to have stable spray, fine and uniform droplets, and high atomization efficiency. Atomizers are widely used and come in many types, which can be divided into:1.air humidifier,manyA humidifier used to humidify air is a type of atomizer.2.Medical nebulizer，A device for treating upper respiratory tract diseases belongs to medical equipment.3.Other types of nebulizers，Such as hair styling spray equipment, one of the important structures composed of electronic cigarettes, used to atomize smoke oil, as well as industrial atomizers such asNiroatomizerwait. At present, atomization technology is becoming mature, but there is still room for improvement. Traditional atomization devices have limited range and lack of advanced rotary atomization methods. However, some atomizers, such as air humidifiers, often need to clean and replace the internal atomization plate, which is time-consuming and labor-intensive and also affects the service life of the atomization plate. Some atomizers have difficulty maintaining a uniform atomization effect, which affects long-term use. Therefore, it is necessary to design a good rotary atomizer.
In order to overcome the shortcomings of existing technology, technical personnelprovide amoreofNiroatomizer。itAdopt the following technical solution: aNiroatomizer, including the base and support frame, as well as the upper shell, lower shell, controller, air supply mechanism, water collection mechanism, spray mechanism, etc. The controller is set on one side of the upper casing and is fixedly connected to the upper casing; an air supply mechanism is provided in the lower casing; the air supply mechanism includes a mounting plate and an air compression component; the mounting plate is fixed on the base through bolts and is located in the lower casing; the spray mechanism includes a mist-eliminating cover, a spray component and a rotating component.。
Among them, theThe air compression assembly includes an air compressor and a partition. The air compressor is vertically installed on the top of the installation plate and is fixedly connected to the installation plate. The partition is fixedly installed between the upper casing and the lower casing. A through-air inlet is provided in the middle of the top of the partition. The air supply end of the air compressor is fixedly inserted into the air inlet and extends into the upper casing. The air compressor is fixedly connected to the controller. The flow tube is arranged in a conical shape, and the drainage assembly includes a sleeve, a fixed ring and a plurality of support rods. The spray assembly includes a tee, a fixed frame and two spray buckets. The mist diffusion cover is arranged on the top of the upper casing and is fixedly connected to the upper casing. The rotating assembly includes the base, guard, motor, shaft and interlocking rods.
ShouldNiroatomizerThe beneficial effects are: first, by optimizing the structure, the fixed frame and the fixed ring cooperate to drive the rotation of the three-way tube to achieve rotating spray. The mist droplets will disperse annularly from the spray column hole on the spray cover, which is more efficient; second, by quantitatively pouring the liquid from the feed hopper, closing the sealing cover and operating the controller, the liquid can be atomized through rotation. The operation is simple and safe, which greatly improves the atomization efficiency of the liquid.
Related news
