Industrial applications of centrifugal atomizers.
Release time：
2025-12-01 11:43:00
Centrifugal atomizer Features: Durable, large humidification capacity, low energy consumption, and generally does not require maintenance or replacement of accessories.
Modern industrial production and scientific experiments pay more and more attention to air humidity, and the requirements are getting higher and higher. If the humidity cannot meet the requirements, it will cause varying degrees of adverse consequences. The common characteristics of centrifugal mechanical atomization are simple structure, low energy consumption and low noise, but it requires high processing accuracy, and small-capacity nozzles are prone to coking and clogging.
The working principle of the centrifugal atomizing humidifier is that the centrifugal turntable rotates at high speed under the action of the motor. The water is thrown out and hits the atomizing disk, and is broken into fine water particles through the atomizing grille above. It's the edge of the atomizer disk again. Atomize tap water into ultra-fine particles of about 5-10 microns and spray them out. After the air is blown in, the air is fully humidified and cooled through the exchange of heat and moisture between the air and water particles. Centrifugal humidifiers can be installed at will, such as hanging, wall-mounted, wall-mounted, etc. They do not occupy the workplace, are safe, reliable, and have a long life. The notable features of atomizing centrifugal humidifiers are: durability, large humidification capacity, low energy consumption, and generally no need for maintenance or replacement of accessories.
In modern industrial production and scientific experiments, air humidity is paid more and more attention and the requirements are getting higher and higher. If the humidity does not meet the requirements, it will cause varying degrees of adverse consequences. Humidity requirements in electronic factories, semiconductor factories, program-controlled computer rooms, explosion-proof factories and other places. If the relative humidity is not enough, static electricity will increase, product yield will decrease, chips will be damaged, and even cause explosions in some explosion-proof areas. The harm caused by "static bombing" is immeasurable. When the air humidity is lower than 40%RH, static electricity is easily generated. Valid above 45%RH. Therefore, the centrifugal atomizer is used to remove static electricity and cool down industrial plants. There are no requirements for the water source, ordinary tap water is fine.
Advantages of the centrifugal atomizer It can use the circulating water tank for water supply and automatically replenish water. The humidification method is constant enthalpy humidification, which has a purifying and filtering effect on indoor air; the water consumption is equal to the humidification amount; the two-speed motor has low noise, and is especially suitable for places that require low noise. The installation methods are flexible and diverse, and can be installed at will. The construction is simple, safe and reliable. It is especially suitable for direct humidification in working conditions with high humidity requirements or heat sources that are difficult to humidify. The working water pressure of the centrifugal humidifier is 0.6-3.0MPa, and the water source required by the Centrifugal Atomizer is clean tap water; The working environment of the Centrifugal Atomizer contains fine lines or dust. Users should clean it regularly according to their own use environment, usually every six months or one year.
Related news
