Home
>
News Center > Industry news
> Wuxi desulfurization atomization disk manufacturer says maintenance?
Wuxi desulfurization atomization disk manufacturer says maintenance?
Release time：
2025-12-01 13:45:51
The development prospects of the Wuxi desulfurization atomization disk industry are very good, because it brings many benefits to the enterprise when used, so it is favored by customers. In order to let everyone be more familiar with it, understand its daily use, and better bring benefits to the enterprise, next we Wuxi desulfurization atomization disk manufacturer will talk about some small knowledge points related to the desulfurization atomization disk, hoping to help more people and make it bring more benefits.
Wuxi desulfurization atomization disk manufacturer said that spray bottles that spray chemicals and liquids need to be cleaned after use. Especially the place where the flue gas desulfurization atomizer is filled is where tools are filled, spray liquids, agricultural materials, etc. are prone to decay and corrosion. Be sure to wipe away any residual liquid after use and then clean with special detergent. Cleaning the desulfurization atomization cabinet requires a series of positioning and maintenance work. When the equipment is worn, its color needs to be polished with sandpaper or grinding tools. Then the Wuxi desulfurization atomization disk manufacturer said that the polished desulfurization atomization disk needs simple treatment to prevent debris from being mixed into the materials or agricultural materials when used next time, so that the liquid removal function can function normally and affect the stability of the liquid removal performance.
Wuxi desulfurization atomization disk manufacturer said that the principle of desulfurization atomization disk is air rupture and collision, and the atomized particles produced have the characteristics of small diameter, wide coverage and strong penetrating power. Gas and liquid are mixed and atomized in the gas cap chamber. Depending on the degree of friction between compressed air and liquid, a very uniform and fine atomization effect will be produced. Under normal circumstances, the atomization particle size is below 80 microns. Spray tanks used for spraying chemicals and liquids need to be cleaned after use. In particular, the flue gas desulfurization atomization booth is a filling tool that is highly corrosive to liquids and chemicals during the spraying process and is easily corroded. To protect system equipment from the effects of these corrosive products, timely maintenance and cleaning is required.
In order to prevent the nozzle from falling off when the atomization disk rotates at high speed, an annular step surface is usually provided in the hole where the atomization disk and the nozzle fit, and the position of the outer end of the nozzle is restricted by the annular step surface. This structure makes it very difficult to process the step surface of the small diameter hole, and it is difficult to process the main body of the atomizer disk. The Wuxi desulfurization atomizer disk manufacturer said that the technical problem to be solved is to provide a high-speed separation heart-shaped atomizer atomizer disk that can effectively improve the wear resistance of the nozzle. The technical solution of the utility model includes a high-speed centrifugal atomizer atomizing disk used for flue gas purification treatment and a high-speed centrifugal atomizer atomizing disk used for flue gas purification processing, including a disk body, an upper cover and a nozzle.
The content of the above article is to introduce to you the key points you need to know about the desulfurization atomization disk. If you see a friend, you can read it carefully. We will continue to update in the future. If you still don’t understand anything, you can come to us for consultation at any time.
Related news
