Home
>
News Center > Industry news
> Wuxi desulfurization atomization disk manufacturer says how to make it?
Wuxi desulfurization atomization disk manufacturer says how to make it?
Release time：
2025-12-01 13:46:20
With the rapid development of science and technology in the world, processing technology has become more and more familiar and has entered people's vision. Green manufacturing has been highly valued, and the manufacturing of desulfurization atomization disks has also been promoted to a new stage. So what should our Wuxi desulfurization atomization disk manufacturers pay attention to during use, and what are its production methods?
Wuxi desulfurization atomizer disk manufacturer said that this utility model belongs to the field of solid waste incineration treatment, specifically involving high-speed centrifugal atomizer atomizer disks for flue gas purification treatment in urban domestic waste incineration power plants. So, let’s learn about the production method of the atomization disk. The high-speed centrifugal atomizer disk is one of the important equipment in the fields of chemical industry and environmental protection, especially in the flue gas purification treatment of coal-fired power plants and waste incineration power plants. Wuxi desulfurization atomization disk manufacturer said that the atomization disk is an important part of the high-speed centrifugal atomizer and plays a very important role during use.
Wuxi Desulfurization Atomizer Disk Manufacturer said that during waste incineration power generation flue gas purification treatment, a certain concentration of lime slurry is atomized by a high-speed centrifugal atomizer and fully reacts with the acidic gas in the flue gas. The hard particles in the lime slurry will cause heavy wear and blockage of the nozzle of the atomization disk of the atomization device. If the nozzle is damaged or clogged, it will destroy the dynamic balance of the atomization disk, produce excessive vibration and noise, and seriously affect the atomization effect of the atomization device and the life of the entire machine. Therefore, many sprayers now make nozzles of wear-resistant materials and install the nozzles on the atomization disk. After years of development, the wear-resistant nozzle structure and the assembly structure of the atomization disk mainly have the following problems. The outer surface of the wear-resistant nozzle is a cylindrical surface, which fits with the cylindrical hole of the atomization disk main body. However, in order to fix the nozzle on the atomization disk main body, the Wuxi desulfurization atomization disk manufacturer said that the outer surface of the nozzle is generally bonded and fixed in the cylindrical hole of the atomization disk. It is very difficult to replace the nozzle when it is worn or broken. There is a certain gap between the wear-resistant nozzle and the main body of the atomization disk. When the atomization disk is in use, the high-speed water flow continues to wash away the gap. The gap gradually expands and deepens, and the nozzle is easy to fall off. In poor cases, the main body of the atomization disk may also break.
Our company insists on using good materials and high-quality products, taking responsibility for customers, putting customers first, and creating a win-win situation together. We have always maintained high-quality services, adding the color of success to thousands of consumer and industrial products, gaining widespread recognition in the industry, and realizing our vision of win-win with our partners. If consumers want to buy this type of product, remember to shop around. This is an information age. There is no need to go around the market exhaustingly. You can directly search for relevant manufacturers on the Internet.
Related news
