How to use and maintain the atomizer disk
Release time：
2025-12-01 11:36:58
Spray bottles used to spray chemicals or chemical liquids need to be cleaned after use. In particular, the atomizer disk is a tool for filling and dispersing liquids or pesticides that are prone to decay and erosion. In order to protect the system equipment from these corrosive products, timely maintenance and cleaning are required. So, let’s learn about the use and maintenance of Atomization Disk!
Atomization Disk is based on the original design of the sheath, keeping the structural design and alloy material unchanged, optimizing the ceramic gasket material, and using high-speed flame spraying technology to further improve the cleaning performance of the internal components of the atomization disk against lime slurry and extend its life.
Atomizer disk Effectively configure the specific position of the support plate. The specific position of the support plate is configured at the connection point to reduce the vibration load of the shaft system.
Atomizer plate gear transmission moves at a constant speed when the supply of raw materials changes, and the mechanical efficiency is high
The Higgs atomizer plate adopts a unique dynamic balancing process, the balance accuracy exceeds G1 level, and the overall simplicity and beauty are simple and beautiful.
Set up a wave bearing on the atomizer disk to support the flexible shaft at 3 support points to maintain the shaft system and quickly exceed the critical speed.
The newly improved atomization head on the atomization plate adopts a new open structure, which is convenient for mist suction, greatly reduces the risk of lime slurry caking during application, and is easy to protect.
Characteristics of the atomization disk
The atomization disk produced by our company has a compact structure, solid structure, small size, very convenient operation, cleaning and later maintenance, ensuring a balanced operation process, and the atomization disk can smoothly rotate at high speed. It is easy to operate, and the atomization disk has small vibration and low noise. One end of the diversion column adopts an angular knife edge and is notched to one side, which can make the atomized liquid flow smoothly, reduce shear resistance, achieve uniform atomization, and at the same time reduce the wear of the atomized liquid on the atomization hole, extending the service life.
Use and maintenance of atomization disks
Watering cans used to spray chemicals or chemical liquids need to be cleaned after use. In particular, flue gas desulfurization atomization disks are filled with tools, and liquids or pesticides that are very easy to corrode when sprayed are sprayed. To protect system equipment from these corrosive products, timely maintenance and cleaning is required.
1. After use, you need to wipe off the remaining liquid and clean it with special detergent.
2. When cleaning the atomization disk, complete positioning and maintenance work is required. When the atomization disk equipment of the atomization device is worn, their color needs to be re-polished with sandpaper or grinding tools.
3. The polished desulfurization atomization disk needs to be simply processed to prevent debris from being mixed into medicines or pesticides during next use, affecting the normal functioning of the liquid and the stability of its properties.
The above introduction is how to use and maintain the atomizer disk. If you need to know more, you can contact us at any time!
Related news
