How to use atomizer disc
Release time：
2025-12-01 11:37:51
The desulfurization disk gas and liquid are mixed and atomized inside the air cap chamber. The principle of atomization is air rupture and collision, which has the characteristics of small atomized particle diameter, large coverage area, and strong penetrating power. It uses the friction between compressed air and liquid to produce a very uniform and dense atomization effect. Under normal circumstances, the atomized particle size is below 80 microns. So, let’s learn about it together Atomization diskUse the principle!
Advantages of Atomization disk
Atomization disk mainly has the following characteristics.
1. Made of special materials, light weight, suitable for high-speed dynamic balancing operation;
2. High hardness and high wear resistance;
3. It has acid resistance, alkali corrosion resistance, and resistance to high temperature environments. Oxidizing, long life
4. High thermal stability;
5. The overall structure is compact, the atomizer disk operates smoothly under high-speed rotation, with small vibration and low noise.
6. Reasonable structure, easy to install and disassemble.
7. Adopt special dynamic balancing technology without damaging the overall beauty.
Cleaning and maintenance methods for desulfurization cabinets
Sprinklers that spray chemicals and liquids need to be cleaned after use. Especially the place where the flue gas desulfurization atomization disk is used for filling and spraying liquids and pesticides that are prone to corrosion and corrosion. In order to protect the equipment from these corrosive products, what should be done after use?
1. Be sure to wipe off the remaining liquid after use, and then clean it with special detergent.
2. The cleaning of the desulfurization atomization cabinet requires a series of positioning and maintenance work. When the equipment is worn, its color needs to be polished with sandpaper or grinding tools.
3. Then, the polished desulfurization atomization disk needs to be simply processed to prevent debris from being mixed into medicines or pesticides during the next use, so that the liquid can function normally and affect the stability of the liquid properties.
The principle of the atomization disk of the desulfurization disk is the rupture and collision of air. The atomized particles produced have the characteristics of small diameter, wide coverage and strong penetrating power. Gas and liquid are mixed and atomized in the gas cap chamber. Depending on the degree of friction between compressed air and liquid, a very uniform and fine atomization effect will be produced. The atomization particle size under normal conditions is below 80 microns.
Spray tanks for spraying medicines and liquids need to be cleaned after use. In particular, the flue gas desulfurization atomization booth is a filling tool. It is very corrosive to liquids and pesticides when spraying and is prone to corrosion. To protect system equipment from these corrosive products, timely maintenance and cleaning is required.
The above introduction is the principle of using the atomizer disk. If you need to know more, you can contact us at any time!
Related news
