Home
>
News Center > Industry news
> What are the characteristics and precautions of centrifugal atomizer?
What are the characteristics and precautions of centrifugal atomizer?
Release time：
2025-12-01 13:35:15
The central atomizer is suitable for drying heat-sensitive substances such as biological products, biopesticides, and enzyme preparations. Since the ejected material is only exposed to high temperatures when it is ejected into heavy particles, it can only be heated momentarily, which prevents these active materials from being destroyed after drying. Many chemical industries choose to use centrifugal atomizer when producing products. So what issues should be paid attention to when using centrifugal atomizer? The characteristics of the centrifugal dryer are basically determined by the characteristics of the atomizer.
. The drying of centrifugal atomizer does not require strict filtration equipment. If there is no fibrous liquid in the feed liquid, the liquid channel is basically not blocked; it can adapt to higher viscosity liquids; when adjusting the throughput, there is no need to change the working state of the atomizer, and the same product can be obtained by changing the feed speed within 25%. Because the speed of the water eliminator is easy to adjust, it is easier to empty the product particles and the particle size distribution is narrow. . The droplets move in a combination of radial and tangential directions. The space in the drying room can be utilized; . Advantages of Centrifugal Atomizer equipment. The operation is simple and stable, the control is convenient, and it is easy to realize automatic operation. The higher the spray pressure, the smaller the nozzle straight line, the smaller the mold droplets, and the larger the mist droplets, the worse the situation. No dew will appear during the process. Especially for the dry explosion of heat-sensitive materials in hot air, all products are spherical, with uniform particle size, good fluidity, good solubility, high purity, and good quality; Wide range of applications:. Centrifugal atomizer According to the characteristics of the material, hot air drying can be used. Blasting or cold air granulation, strong adaptability to materials.
. Centrifugal atomizer is suitable for drying heat-sensitive substances such as biological products, biopesticides, and enzyme preparations. Since the ejected material is only exposed to high temperatures when it is ejected into heavy particles, it can only be heated momentarily, which prevents these active materials from being destroyed after drying. Attention needs to be paid to ensure the cleanliness of the centrifugal atomizer. A clean environment is very important during the processing of centrifugal zeroing machines, and spray drying and spray drying are important processes for its quality control. In order to ensure the quality of the medicine, the parts of the centrifugal atomizer that are in contact with the material should be made of stainless steel, and highly corrosive materials should be made of 316L stainless steel. Since the internal system of the centrifugal dehumidifier is relatively large and cannot be placed in the clean area as a whole, it often only collects a part of the materials in the clean area. In this case, the system is required to have good sealing performance to prevent the system from being contaminated by the outside world. Be sure to avoid sticking to the wall. Sticking in solid preparations is a serious problem during the spray drying process of the centrifugal dehydrator, especially for traditional Chinese medicine, which will hinder the normal operation of the centrifugal dehydrator. When the liquid product is fed into the centrifugal dehydrator, the high-speed flow channel in the dehydrator will cause the liquid to condense, thereby converting the product into a solid-liquid mixed particle state. In the second step of the centrifugal eliminator, the dew particles are directed into a temperature- and airflow-controlled drying chamber, where hot air will evaporate the liquid in the particles. For the final product to be up to par, the particles need to be in contact with hot air for the right amount of time to maintain a certain moisture content in the powder.
Related news
